New windows and doors improve comfort, cut energy bills and add long-term value to your home. Sightline Windows & Doors Clewiston pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
1. Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
2. Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
3. Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Casement Windows in Clewiston, FL
Casement windows in Clewiston, FL are hinged on one side and swing outward with a hand crank, giving you full-width ventilation and a clean, unobstructed sightline – no meeting rail splitting the view. For homes in Hendry County where afternoon heat and hurricane-season wind loads are facts of life, a properly glazed, impact-rated casement with a tested compression seal is one of the more practical window choices available. At Sightline Windows & Doors, every casement project starts with a measured survey you keep, and the written price on that document is the price on the final invoice – no revision, no surprise line items. If you’d like to talk through what your opening requires before anything else, call us at (863) 509-1135 and a live person will pick up.
Casement windows sit under our broader Window Installation in Clewiston service, which covers every window type and opening configuration we handle across Hendry County. This page focuses specifically on casements – how they’re specified, what they cost in the Clewiston market, and what the Haven Standard means for your project from survey through final sign-off.
When You Need Casement Windows

Not every opening calls for a casement-Picture & Fixed Windows or other styles may suit better-but certain conditions make them the clearest choice. Here are the scenarios we see most often in Clewiston homes:
- High-traffic ventilation walls facing the prevailing breeze. Clewiston sits at the western edge of Lake Okeechobee, and the southeast trade winds that come off the water in spring and early summer are consistent enough to be useful. A casement sash that swings fully open acts like a scoop, directing moving air into the room in a way that a double-hung raised only halfway never quite matches.
- Impact-rated replacement on a narrow or tall rough opening. Some original openings in older Clewiston construction – homes built in the 1970s and 1980s along Francisco Street and in the older subdivisions near U.S. 27 – are sized in ways that make double-hung sashes awkward. A casement unit can be specified to fit a taller, narrower opening without sacrificing code-required egress area or impact rating.
- Kitchens and bathrooms where a crank operation is more practical than reaching over a counter. You don’t have to lift or push – you turn the crank, and the sash opens at whatever position you leave it. For windows above a kitchen sink or beside a shower wall, that matters day to day.
- Rooms where you want an unbroken glass area. A casement has one sash, one lite. There’s no horizontal rail at mid-height interrupting the view the way a double-hung has. On a lot that faces the lake or the cane fields, that difference is visible every morning.
- Energy performance upgrades in homes without central HVAC zoning. A casement’s sash compresses against a continuous perimeter seal when closed, which produces lower air infiltration numbers than a sliding or single-hung window of comparable size. In a Clewiston summer where cooling loads run high from May through October, that seal efficiency shows up on the electric bill.
- Insurance re-rating after a wind mitigation inspection. If a Clewiston homeowner has recently had a wind mitigation report that identifies non-impact openings, replacing those windows with tested, impact-rated casements from a manufacturer whose product carries the relevant NOA (Notice of Acceptance) is one of the cleaner paths to a premium reduction. We specify product by what the opening requires and what the inspector flagged, not by margin.
Before
AfterOur Casement Windows Process
Every casement replacement or new installation we complete in Clewiston follows the same documented sequence. Haven Clause 4 – Evidence on Every Job – means that record exists whether the project is one window or fourteen.
- Measured Survey. A background-checked, uniformed Sightline technician visits the opening and takes precise rough-opening dimensions: width, height, diagonal, and depth of the jamb. We also read the existing frame material, check for rot or water intrusion at the sill, and note the wall construction – block construction common to Clewiston homes handles shimming differently than wood-frame walls. You receive a copy of this survey. Haven Clause 1: Have it in writing.
- Written Price Before Any Work Starts. The measured survey and the price quote are the same document. We specify the product line – whether that’s a CWS impact casement, an ES Windows unit, or an ECO Window Systems frame – by what the opening’s size, orientation, and performance requirement calls for. The price you see at the survey is the price on the final invoice. We do not revise it when we open the wall.
- Product Selection and Order Confirmation. Once you approve the written scope, we place the order with the specified manufacturer and confirm lead time in writing. We carry product from CWS, ES Windows, ECO Window Systems, and Mr-Glass, among others, which means we can match impact-rating requirements, U-factor targets, and frame color without being limited to a single line. We tell you the confirmed delivery window before you sign.
- Installation Day. Our crew arrives in uniform, on the scheduled date. Haven Clause 2: Arrive on schedule. The existing sash and frame are removed, the rough opening is inspected for moisture or structural issues, and any corrective work is documented before the new unit goes in. The casement is shimmed, fastened to the rough opening per the product’s NOA installation requirements, and sealed with a continuous bead of low-expansion foam at the jamb perimeter. Exterior flashing tape closes the head and sill. We do not leave gaps to caulk over later.
- Glazing and Hardware Check. After the frame is set, we verify that the crank mechanism operates through its full range, that the sash compresses evenly against the perimeter seal at all four corners, and that the lock engages without forcing. For impact-rated units, the glazing package – typically a laminated interlayer between two lites of glass – is inspected at the edge for delamination or seal failure before we sign off. Any unit that doesn’t meet spec is flagged and documented before we leave.
- Photo Record and Sign-Off. Haven Clause 4 means every completed casement installation leaves with a documented photo record: the rough opening before work, the installed frame, the exterior flashing, the hardware function, and the interior finish. You receive this record. The 365-Day Done Right Promise is stamped on the job: if it’s not done right, we make it right, in writing, within that window. No verbal assurances.
Casement Windows Pricing in Clewiston

Casement window replacement in Clewiston, FL typically runs between $480 and $1,350 per window installed, depending on the factors below. That range covers the unit cost, the installation labor, and the standard flashing and sealing work – not as separate line items, but as a single written price before anything is touched. Impact-rated casements, which are the most common specification in Hendry County given the wind zone requirements, tend to fall in the upper half of that range.
| Configuration | Installed Price Range (per window) |
|---|---|
| Standard casement, single unit, non-impact, retrofit into existing frame | $480 – $680 |
| Impact-rated casement, single unit, retrofit, standard size | $720 – $980 |
| Impact-rated casement, single unit, full-frame replacement (frame removed) | $880 – $1,150 |
| Casement in a non-standard or oversize rough opening (tall/narrow) | $950 – $1,350 |
| Multi-window project discount (4+ casements, same address) | Documented on written scope; typically $60-$120 per unit reduction |
What Moves the Price
- Impact rating. An impact-rated casement – required in Hendry County’s wind-borne debris region for any new installation or full-frame replacement – uses a laminated glazing package and a reinforced sash frame that costs more than a standard unit. That’s not optional in Clewiston; it’s code.
- Frame condition at the rough opening. Block construction homes in Clewiston rarely have rot, but sill pan failures and old wood bucks that have deteriorated do appear, especially in homes built before 1995. If the buck needs to be replaced before the new frame can be set, that work is documented and priced on the written scope before we proceed – not discovered mid-job.
- Glass package specification. U-factor and SHGC (solar heat gain coefficient) targets affect the glazing package. For a west-facing casement on a Clewiston home taking full afternoon sun, specifying a lower SHGC – the measure of how much solar heat passes through the glass – reduces cooling load at the cost of a modest price increase over standard clear glass.
- Opening count. Multi-unit projects carry lower per-window labor costs because setup, staging, and disposal are spread across more units. A four-casement replacement in the same room on the same day is priced accordingly on the written scope.
- Product line. CWS, ES Windows, and ECO Window Systems each occupy slightly different price tiers for comparable performance specs. We specify by what the opening requires and what the budget allows – both documented in the same written survey the customer keeps.
Estimates are free. If you’ve already received a written quote from another contractor, bring it to us – we offer a free second opinion on any written estimate and will review it line by line at no charge. Call (863) 509-1135 to schedule a measured survey, or to ask what a specific casement configuration would cost for your Clewiston address before committing to anything.
FAQs – Casement Windows
Are casement windows required to be impact-rated in Clewiston, FL?
Any new Window Installation services or full-frame replacement in Clewiston falls under Hendry County’s wind-borne debris region requirements, which means impact-rated glazing is required for those openings – not optional. A retrofit that drops a new sash into an existing, structurally sound impact-rated frame has different code implications, but a full-frame replacement triggers the current Florida Building Code requirements for the wind zone. We specify product by what the code requires for the specific scope of work, and that determination is documented on the written survey before any price is set. Call (863) 509-1135 and we can walk through what your specific opening and project type requires.
How long does a casement window replacement take in Clewiston?
A single casement replacement – survey to completed installation – typically runs two to three weeks from the date you approve the written scope, accounting for product lead time from the manufacturer. The installation itself, once the unit arrives, takes two to four hours per window for a standard retrofit, somewhat longer for a full-frame replacement that involves removing the existing buck from a block wall. Multi-window projects are scheduled to complete in a single visit where the opening count and site logistics allow it. Lead times are confirmed in writing at the time of order, not estimated verbally and revised later.
Can casement windows be used as egress windows in a Clewiston bedroom?
Yes – a casement window can meet egress requirements more reliably than most other window types because the sash opens fully, giving the full width of the opening as usable egress area. Florida Building Code requires a minimum net clear opening of 5.7 square feet (with minimums of 20 inches in width and 24 inches in height) for egress windows in sleeping rooms. Because a casement swings fully open rather than sliding or tilting like Horizontal Roller Windows, a casement sized to the rough opening typically clears that threshold with a smaller overall unit than a single-hung would need. We note egress compliance on the written survey for any bedroom window replacement.
What’s the difference between a retrofit casement replacement and a full-frame replacement in Clewiston?
A retrofit (also called a pocket replacement) removes only the existing sash and leaves the original frame and buck in place, then installs a new sash-and-frame insert into that existing frame. It’s faster and less disruptive, but it requires the existing frame to be structurally sound, square, and free of rot or moisture damage – conditions we verify at the measured survey. A full-frame replacement removes everything back to the rough opening in the wall: the sash, the frame, and the buck. This is the correct scope when the existing frame is deteriorated, when the rough opening needs to be resized, or when a Clewiston home is undergoing a full impact-window upgrade that requires a new NOA-compliant installation from the substrate out. The written scope specifies which approach applies to your opening, and the price reflects that scope before any work starts.
Why Clewiston Homeowners Work With Sightline

The practical reason most Clewiston homeowners come back to Sightline – or send a neighbor our way – is the written price that doesn’t change. Since 2012, Sightline has completed more than 18,000 window and door installations across South Florida, every one of them under a written scope the customer kept before the first tool was lifted. The measured survey and the final invoice are the same document. That’s Haven Clause 1, and it has been the founding principle of this company since the beginning.
Sonia Raman leads the Clewiston operation, and the Haven Standard she applies here is the same one that governs every Sightline project: Have it in writing, Arrive on schedule, Verified crews, Evidence on every job, No surprises. Background-checked, uniformed technicians carry their license information before arriving at your door – Haven Clause 3. The 365-Day Done Right Promise is stamped on every job in writing: if it’s not done right, we make it right. Not as a verbal assurance – as a written commitment on the documentation you receive when the job is done.
For casement windows specifically, the product lines we draw from – including CWS, ES Windows, and ECO Window Systems – are specified by what the opening’s size, orientation, wind-zone classification, and energy target require. We carry eight manufacturer lines for that reason. You can also visit our home page to see the full scope of what Sightline installs and replaces across windows and doors.
If you have a written quote from another contractor and want a second opinion before you sign, bring it to us – we review it at no charge and will tell you in plain language what it says and what it doesn’t. Call (863) 509-1135 to schedule a free measured survey for your Clewiston home. A live person answers, every time.
Written by Sonia Raman, Owner at Sightline Windows & Doors Clewiston, serving Clewiston.
Six Reasons Homeowners Choose Sightline Windows & Doors Clewiston
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Sightline Windows & Doors Clewiston Services
