New windows and doors improve comfort, cut energy bills and add long-term value to your home. Sightline Windows & Doors Clewiston pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
1. Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
2. Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
3. Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Fast, Reliable Sliding & Patio Doors Across Westgate
Sliding and patio door replacement in Westgate, FL typically runs $2,800-$6,500 for a standard opening and $5,500-$12,000 for impact-rated custom units on the area’s 1950s-1970s CBS homes, with lead times of 4-6 weeks for fabricated orders rather than next-day installation. We measure every opening ourselves, document the conditions, and fix the price in writing before any unit is ordered. Call (863) 509-1135 to schedule your free measured survey.
Our crews serve Westgate from the brand’s Miami office, and we’ve spent years working the concrete-block ranches off Okeechobee Boulevard and the side streets near the Westgate Community Center. The homes here are specific - small CBS construction from the post-WWII era, hand-poured rough openings that are rarely square, and original aluminum sliders that predate Florida’s hurricane codes entirely. That specificity is why we don’t quote over the phone. We arrive with a laser measure, a level, and a camera, and we leave you with a written scope that doesn’t change.
Why Sightline Windows & Doors Clewiston Is Westgate’s Preferred Sliding & Patio Doors Company

We’ve installed impact-rated sliding and patio doors across Palm Beach County’s unincorporated CDPs since 2012, and Westgate represents a distinct category of project. The 18,000+ openings in our record include hundreds in this immediate area - CBS ranches with jalousie windows still in the bathrooms, single-pane aluminum sliders failing at the track, and homeowners receiving letters from Citizens Insurance or private carriers demanding Florida Product Approval documentation to maintain wind-mitigation credits.
Our reviews from Westgate customers consistently cite the same elements: the measured survey they keep, the photo record of their opening conditions, and the fact that the written quote matched the final invoice. That’s Haven Clause 1 - Have it in writing - and it’s how we’ve operated since founding.
Response time to Westgate is typically same-week for the initial survey, with scheduling coordinated from our Miami office. The actual install date is set only after the custom unit’s lead time is confirmed, because on this tier the product, not the labor, drives the calendar.
Local knowledge matters here in ways it doesn’t in newer suburbs. We know that Palm Beach County’s building department handles Westgate permits directly, that the county’s wind-borne debris region requires impact-rated or shutter-protected openings, and that the original 1960s aluminum sliders in these homes were never designed for either. We pull the permit, submit the Florida Product Approval documentation, and schedule the inspection - included in every scope, never added later.
Before
AfterOur Sliding & Patio Doors Services in Westgate
Patio Doors
Standard patio door replacement in Westgate starts around $2,800 for a stock-sized vinyl or aluminum unit in a relatively square opening. Most Westgate homes don’t have relatively square openings. The hand-poured concrete rough walls common to 1950s-1970s CBS construction here mean we field-measure for adaptor frames or custom-sized units on the majority of jobs. We specify by performance tier - non-impact with shutter provisions, or full impact-rated - and we name the price in dollars before any work starts.

Impact Sliding Glass Doors
Impact sliding glass doors are the dominant request we receive from Westgate homeowners, driven almost entirely by insurance pressure. Citizens Insurance and private carriers operating in Palm Beach County increasingly require Florida Product Approval-rated impact windows and doors for wind-mitigation credits, and the original single-pane aluminum sliders in Westgate’s housing stock predate those codes by decades. A typical impact slider for a Westgate CBS ranch runs $4,200-$7,800 installed, depending on opening size, frame material, and the degree of shimming required to square the unit in an out-of-plumb rough opening. We specify CWS and ES Windows impact lines for this market - both carry Miami-Dade NOA and Florida Product Approval numbers matched to Palm Beach County’s wind zone.

Sliding Glass Door Replacement
Sliding glass door replacement in Westgate is rarely a remove-and-replace operation. On a 1962 CBS ranch off a side street in the Westgate CDP, our tech pulled a worn 1960s single-pane aluminum slider whose track had corroded and whose seal had failed from years of UV and humidity, and discovered the concrete rough opening was out of square by nearly an inch. We field-measured for a custom Florida Product Approval-rated impact slider with low-E glazing and a laminated glass interlayer, documented the opening conditions for the county permit submittal, and set the install date only after the unit’s lead time was confirmed in the signed order - because on this tier the product, not the labor, drives the schedule. That job is representative of what we find throughout Westgate.

Impact French Patio Doors
Impact French patio doors serve Westgate homeowners who want the aesthetic of hinged operation with the code compliance their insurance requires. These units run $5,500-$10,500 in this market, with the higher end reflecting custom sizing for non-standard rough openings and the hardware upgrades that come with multi-point locking systems. We specify ECO Window Systems and Mr-Glass lines for French door applications where the opening configuration demands it - always by what the opening requires, not by what is in stock.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Westgate

We draw from eight verified manufacturer lines - PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux - and we specify by performance tier and price range, not by margin. For Westgate’s impact-rated sliding and patio door needs, we most frequently deploy CWS and ES Windows impact sliders, with ECO Window Systems and Mr-Glass reserved for French and specialty configurations. We don’t stock every size; we stock the relationships that let us confirm lead times and track orders through fabrication. For Westgate customers, that means we’re not guessing about delivery dates when we set your install schedule.
Common Sliding & Patio Doors Problems We See in Westgate Homes
- Oxidized aluminum tracks from humidity and UV exposure. Original 1960s aluminum slider tracks oxidize and pit from Westgate’s high humidity and intense UV, so the door drags, then stops sealing - and the failing seal lets the home’s low-E cooling performance collapse right when summer storms hit. The track corrosion is usually advanced by the time we see it, and track replacement alone is rarely sufficient; the frame and glazing assembly has typically degraded in parallel.
- Out-of-square rough openings causing leaks and seal failure. Because the CBS rough openings are hand-poured and rarely plumb or square, a stock-sized impact slider installed without shimming and re-waterproofing leaks at the jamb during tropical downpours - a problem newer-construction suburbs don’t have. We document the out-of-square condition with photos, specify the shimming and flashing detail in the written scope, and pull the county permit with that documentation attached.
- Non-compliant glazing ratings denying insurance credits. Homeowners order a sliding glass door rated for shutter-only or lesser glazing design pressure when Westgate’s inland wind-borne debris region demands impact or shutter compliance; the door fails wind mitigation documentation and the insurance credit is denied. We verify the design pressure rating against the opening’s requirements before specifying any unit - PSF ratings matched to the wind zone, never exceeding +/-100, with Miami-Dade NOA or Florida Product Approval numbers documented in the permit submittal.
- Failed seals and condensation between lites on original single-pane units. The combination of Westgate’s summer storms, high ambient humidity, and temperature differentials from air conditioning causes accelerated seal degradation on aging aluminum sliders. Once the seal fails, the thermal performance is gone and the hardware stress increases as the sash warps. Replacement with a low-E, argon-filled impact unit restores the thermal break and the structural rating simultaneously.
Pricing for Sliding & Patio Doors in Westgate, FL

A typical patio door replacement in Westgate runs $2,800-$4,500 for non-impact units in standard sizes, $4,200-$7,800 for impact-rated sliding glass doors, and $5,500-$10,500 for impact French patio doors. Custom sizing for out-of-square CBS rough openings, adaptor frames, and the additional shimming and waterproofing labor specific to Westgate’s 1950s-1970s housing stock can push the upper end of these ranges by 15-25% compared to newer-construction suburbs with uniform framed openings.
What moves the price: opening dimensions, frame material (vinyl, aluminum, or thermally broken aluminum), impact rating and design pressure, glazing package (low-E, argon, laminated interlayer), and the degree of rough-opening remediation required. We don’t estimate these factors over the phone. We measure on-site, document with photos, and fix the price in writing before any unit is ordered. Call (863) 509-1135 for your free measured survey and written quote.
What Sliding & Patio Doors Costs in Westgate
These are the installed price anchors we see in the Westgate market for completed jobs under the Haven Standard:
| Opening Type | Typical Range |
|---|---|
| Standard patio door, non-impact, stock size | $2,800 - $4,500 |
| Impact sliding glass door, standard opening | $4,200 - $7,800 |
| Impact French patio door, standard opening | $5,500 - $10,500 |
| Custom or oversize impact slider (72″+ width) | $6,500 - $12,000 |
| Whole-home package: 2-3 sliders + windows | $12,000 - $25,000+ |
Westgate-specific cost drivers: the hand-poured concrete rough openings in this area’s CBS ranches are rarely square or plumb, which adds measurable shimming, adaptor frame, and waterproofing labor that uniform framed openings in Royal Palm Beach or Wellington simply don’t require. Floor height matters - slab-on-grade ranches are simpler than elevated or split-level configurations. Wind zone compliance is non-negotiable; Palm Beach County’s wind-borne debris region requires impact-rated or shutter-protected openings, and the Florida Product Approval documentation must match the specific unit configuration. We verify all of this during the measured survey, and the written quote reflects the actual opening conditions - not a generic estimate.
Every engagement begins with a free in-home measure. You keep the survey document. The written quote cannot differ from it. Call (863) 509-1135 to schedule.
Florida Pays You Back

Westgate homeowners replacing aging sliders with impact-rated units may access several incentive programs, though final eligibility rests with the program administrator or your carrier:
- My Safe Florida Home matching grants: Up to $10,000 for qualifying wind-mitigation upgrades, including impact window and door replacement on owner-occupied primary residences. The program requires a wind-mitigation inspection and matches homeowner funds dollar-for-dollar within the grant cap.
- Florida sales-tax exemption: Impact-resistant windows and doors are exempt from state sales tax at purchase. We document this exemption on the written quote.
- Federal 25C energy credit: 30% of product cost, up to $600 per year, on qualifying energy-efficient units that meet ENERGY STAR Most Efficient criteria. The credit applies to the product only, not installation labor.
- Windstorm-premium credits: Average around 25% on the windstorm portion of homeowner’s premiums after a qualifying wind-mitigation inspection ($75-$150). Your carrier sets the final percentage; we provide the Florida Product Approval documentation and the photo record required to support your submission.
We don’t guarantee program approval. We do guarantee that every impact unit we install carries the Miami-Dade NOA or Florida Product Approval numbers your carrier and Palm Beach County will ask for.
We Also Serve Cities Near Westgate
Our Sliding & Patio Doors in Westgate service extends to neighboring communities throughout western Palm Beach County and the Glades region. We also install and replace sliding and patio doors in Clewiston, South Bay, Belle Glade, and Pahokee - with the same measured survey process, the same written-price commitment, and the same Haven Standard documentation on every job. If you’re outside Westgate proper but within the Palm Beach County wind-borne debris region or the adjacent Glades communities, the same code requirements and product specifications apply.
Serving Westgate, FL - Our Local Coverage Area

We’re based in the Westgate area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Sliding & Patio Doors in Westgate
Because Westgate’s 1950s-70s CBS ranch homes were built with hand-poured, rarely-square concrete rough openings rather than the uniform framed openings common in newer Royal Palm Beach and Wellington construction, nearly every sliding or patio door replacement here requires a field-measured custom unit or an adaptor frame rather than a stock size. That reality, combined with the fact that Westgate sits under Palm Beach County’s building department rather than a city’s, means permits, Florida Product Approval documentation, and the custom order itself - not the install crew - set the project’s calendar. A stock-sized unit from a big-box retail install program often fails to fit or leaks within the first season. We measure first, order to the opening, and set the install date only after fabrication lead time is confirmed - typically 4-6 weeks for custom impact units. Call (863) 509-1135 to start with a measured survey.
Westgate sits in Palm Beach County’s wind-borne debris region, where the Florida Building Code requires openings to be impact-resistant or protected by rated shutters. Shutters are a compliance path, but they don’t address the thermal performance, operational function, or insurance-credit optimization that a modern impact slider provides. Most Westgate homeowners we work with are replacing failed original units and seeking the wind-mitigation credits that impact-rated doors unlock; shutters on a failing single-pane slider don’t solve the underlying problem. We specify impact-rated sliding glass doors with Miami-Dade NOA and Florida Product Approval numbers matched to your opening’s design pressure requirements. Call (863) 509-1135 and we’ll review your specific situation.
We determine this during the measured survey. In most Westgate CBS ranches, the original aluminum slider is set in a concrete rough opening with integral sills and jambs; the frame is removable without structural demolition, but the replacement unit must be sized to the actual opening dimensions, not the nominal size stamped on the old frame. We laser-measure width, height, and squareness; photograph the sill condition, jamb embedment, and any stucco or plaster encroachment; and specify either a custom-sized unit or an adaptor frame that bridges the old rough opening to the new door. The photo record goes to you and to Palm Beach County with the permit. Tearing into the CBS wall is rarely necessary; precise measurement always is. Call (863) 509-1135 to schedule the survey.
Yes, typically substantially - if the old unit is the original 1960s single-pane aluminum slider common to Westgate’s housing stock. Those units have no thermal break, no low-E coating, and failed seals that let conditioned air escape and humid outdoor air enter. A modern impact slider with low-E glazing, argon fill, and a thermally broken frame can reduce solar heat gain and air infiltration significantly. The exact savings depend on your home’s overall envelope, your AC system’s efficiency, and your usage patterns, but the improvement in comfort is immediate and measurable. We document the U-factor and SHGC of every unit we specify so you have the performance data for your own analysis or for any energy-credit application. Call (863) 509-1135 for unit-specific performance numbers.
Haven Clause 1: Have it in writing. We don’t order any unit until the customer has a signed written quote that matches the measured survey. The process is: we measure the opening and document conditions with photos; we specify the unit by manufacturer, model, size, glazing package, and hardware; we itemize all labor including shimming, waterproofing, permit, and inspection; we name the total in dollars; and we both sign. That signed document is the order authorization. If field conditions differ from our documentation in ways that would affect price, we stop work, photograph the discrepancy, and present a revised scope for signature before proceeding. The price is fixed because the measurement and the quote are the same document - that’s been Sightline’s founding principle since 2012. Call (863) 509-1135 to schedule your measured survey and receive your written quote.
Contact Sightline Windows & Doors Clewiston

We’re ready to measure your opening, document its conditions, and fix the price in writing before any unit is ordered. Our Sliding & Patio Doors team serves Westgate with background-checked, uniformed technicians identified by license number before arrival, live phone coverage 24/7, and the 365-Day Done Right Promise stamped on every job. Call (863) 509-1135 to schedule your free measured survey and written estimate.
Written by Sonia Raman, Owner at Sightline Windows & Doors, serving Westgate and Palm Beach County under the Haven Standard since 2012.
Six Reasons Homeowners Choose Sightline Windows & Doors Clewiston

Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Sightline Windows & Doors Clewiston Services
What Neighbors Say About Sightline Windows & Doors Clewiston
