New windows and doors improve comfort, cut energy bills and add long-term value to your home. Sightline Windows & Doors Clewiston pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
1. Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
2. Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
3. Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Windows & Doors in Wellington, FL
Window installation in Wellington typically runs $650-$1,400 per opening for standard vinyl or aluminum replacement, with impact-rated units starting around $1,100 and climbing based on glazing package and frame depth. Most Wellington homes we’re in were built between the 1970s and 1990s with original aluminum single-pane windows that predate modern energy codes, so the work usually involves full-frame removal, sill repair, and Florida Product Approval verification rather than simple sash swaps. We measure every opening to the sixteenth, write the price on that same document, and our crews arrive with the Haven Standard checklist already stamped. Call (863) 509-1135 to schedule your free measured survey.
Why Wellington Homes Are Different

Wellington’s planned-community bones show in the housing stock: thousands of CBS tract homes on slab foundations with standardized aluminum window openings, plus newer equestrian estates near the show grounds demanding custom oversized door systems. The inland location matters more than most homeowners realize. Wellington sits outside Miami-Dade and Broward’s High Velocity Hurricane Zone, so contractors work from a broader approved-product catalog while homeowners still qualify for identical windstorm insurance credits. That product flexibility keeps material costs competitive against coastal markets.
The terrain creates its own headaches. Built on former Everglades flatlands with high water tables and organic mucky soils, Wellington’s slab foundations shift seasonally. We’ve measured 1980s-era patio door frames in east Wellington subdivisions racked a quarter-inch out of square from slab movement. That frame has to be corrected before any new impact door unit can be set plumb and sealed to code. The UV load here degrades vinyl and aluminum faster than temperate climates, and afternoon thunderstorms accelerate weatherstripping failure. Every installation we complete in Wellington accounts for these conditions in the written scope.
Before
AfterOur Main Wellington Services
Wellington homeowners call us most often for full window replacement and impact-rated upgrades. Here is what each engagement covers.
Window Replacement in Wellington
We replace original aluminum single-pane and jalousie windows throughout Wellington’s 1970s-1990s subdivisions, measuring each opening for frame depth, sill condition, and Florida Product Approval compliance. The measured survey becomes your written quote under Haven Clause 1. Crews arrive uniformed with license numbers visible, and every job closes with a documented photo record. Window Replacement in Wellington covers our full process for standard, impact, and energy-efficient retrofits.

Impact Windows & Doors in Wellington
Wellington’s property insurance market has made impact-rated openings effectively mandatory for premium relief. We specify PGT, CGI, CWS, and ES Windows products by performance tier and price range, pulling permits under Palm Beach County’s ~140 mph design wind speed. The same written-price-before-work rule applies, and the 365-Day Done Right Promise covers every unit. Impact Windows & Doors in Wellington details our full impact retrofit workflow.

Sliding & Patio Doors in Wellington
Patio door replacement in Wellington routinely involves frame correction for slab-shifted openings before the new unit goes in. We stock rollers, tracks, and hardware for 6-foot through 12-foot slider systems, and we measure sightline alignment to ensure the new door operates without binding. Every installation includes proper flashing integration with the existing stucco envelope. Sliding & Patio Doors in Wellington explains our measured survey and installation protocol.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Window Installation in Wellington

Wellington’s housing stock demands more than standard replacement practice. The original aluminum single-pane windows in 1970s-1990s CBS construction were never designed for today’s energy or impact codes, and their standardized rough openings limit retrofit options without structural modification. We begin every Window Installation with a measured survey the customer keeps, documenting frame depth, sill rot, and squareness before any product is specified. Our written quote cannot differ from that document.
Single & Double Hung Windows
Signs you need it
The top sash drops on its own, the balance shoes are broken or missing, or you feel air movement around the meeting rail during a thunderstorm.
What it costs in Wellington
Standard vinyl single-hung installation runs $650-$950 per opening; impact-rated aluminum double-hung units range $1,100-$1,600 depending on frame depth and glazing package.
How we do it
We remove the existing frame to the rough opening, repair or replace the sill pan, install the new unit with structural screws through the jamb, then seal with backer rod and OSI Quad Max to integrate with the stucco.
Horizontal Roller Windows
Signs you need it
The sash jumps the track, the rollers grind instead of glide, or the locking mechanism no longer engages the keepers at both latch points.
What it costs in Wellington
Standard horizontal roller installation ranges $700-$1,050 per opening; impact-rated units with laminated glass and reinforced frames run $1,200-$1,750.
How we do it
We verify the rough opening width against the manufacturer’s allowable tolerance, set the sill level with composite shims, secure the frame at header and jambs, then adjust roller tension so the sash moves on two fingers of pressure.
What Window Installation Costs in Wellington
| Item | Typical range in Wellington |
|---|---|
| Standard vinyl single-hung window | $650 - $950 |
| Impact-rated aluminum double-hung | $1,100 - $1,600 |
| Horizontal roller window, impact-rated | $1,200 - $1,750 |
How long does window installation take in Wellington?
Most Wellington homes see 8-12 openings completed in one day for standard retrofits; impact-rated jobs with permit inspections add a second day. We schedule Palm Beach County inspections before we arrive so there’s no gap between install and sign-off. Call (863) 509-1135 for a timeline on your specific openings - estimates are free.
Will new windows fix my high cooling bills in Wellington?
Yes, measurably. Original aluminum single-pane windows in Wellington’s 1980s stock typically show U-factors above 1.0; modern vinyl or thermally broken aluminum units with Low-E and argon drop that to 0.30 or below. We document the before-and-after performance specs in your written scope. Call (863) 509-1135 to review your current frame readings.
Door Installation in Wellington

Wellington’s entry and patio doors face the same age-related failures as the windows, with the added stress of slab foundation shift racking frames out of square and compressing weatherstripping. We replace doors in CBS construction from the original planned community era through newer equestrian estates, and every Door Installation begins with a plumb-and-level check of the existing frame before product selection.
Hurricane-Proof Front & Entry Doors
Signs you need it
Your current door lacks a Florida Product Approval number, the jamb flexes under moderate pressure, or your insurer has demanded impact-rated entry protection for premium continuation.
What it costs in Wellington
Impact-rated fiberglass entry door systems with laminated glass sidelites run $2,800-$4,500 installed; solid-panel impact doors without glass start around $2,200.
How we do it
We remove the existing frame to the rough opening, correct any racking from slab movement with composite shims and structural screws, then install the new pre-hung unit with three-point locking hardware and integrate the sill pan with the existing waterproofing.
French & Double Doors
Signs you need it
The active door sags and drags the threshold, the astragal gap is uneven top to bottom, or the multipoint lock no longer draws both doors tight to the header.
What it costs in Wellington
Standard French door replacement ranges $2,400-$3,800; impact-rated aluminum French door systems with laminated glass run $3,500-$5,200 depending on width and hardware grade.
How we do it
We measure the opening at three heights for squareness, specify the frame with integrated composite reinforcement, then set the inactive door first, shim the active door to uniform astragal clearance, and adjust the multipoint lock for even pressure at header, sill, and deadbolt.
What Door Installation Costs in Wellington
| Item | Typical range in Wellington |
|---|---|
| Impact-rated fiberglass entry door with sidelites | $2,800 - $4,500 |
| Solid-panel impact entry door | $2,200 - $3,200 |
| Impact-rated aluminum French door system | $3,500 - $5,200 |
Do I need a permit to replace my front door in Wellington?
Yes. Palm Beach County requires a building permit for any entry door replacement that alters the frame or changes the wind-load rating; we pull the permit and schedule inspection as part of our written scope. Call (863) 509-1135 and we’ll verify your specific requirements at no charge.
Can you match my stucco after door replacement?
We integrate the new sill pan and flashing with the existing stucco using matching texture and elastomeric sealant; for larger openings we coordinate with our stucco repair subcontractor and document the finish in your photo record. Call (863) 509-1135 to see documented examples from nearby jobs.
Energy-Efficient Windows in Wellington

Wellington’s intense UV load and afternoon thunderstorm cycle punish windows that lack modern glazing packages, and the original aluminum single-pane stock in most subdivisions offers essentially no thermal barrier. We specify Energy-Efficient Windows by performance numbers the customer can verify: U-factor, SHGC, and visible transmittance, matched to each opening’s solar orientation.
Low-E & Argon Gas Glass
Signs you need it
Your floors and furnishings show fading near south- and west-facing windows, or you feel radiant heat through the glass even when the air conditioner is running continuously.
What it costs in Wellington
Low-E with argon fill adds $80-$150 per opening over standard clear glass in vinyl frames; in aluminum systems the upcharge runs $120-$200 for thermally broken construction.
How we do it
We specify the glazing by orientation: hard-coat Low-E for east-facing openings where morning sun dominates, soft-coat Low-E with argon for west and south exposures, then document the SHGC and U-factor on the written quote.
ENERGY STAR Replacement Windows
Signs you need it
Your current windows carry no NFRC label, your summer electric bills exceed $350 monthly for a 2,000-square-foot home, or you’re claiming federal energy efficiency tax credits.
What it costs in Wellington
ENERGY STAR certified vinyl replacement windows range $750-$1,150 per opening installed; premium aluminum ENERGY STAR systems with thermal breaks run $1,100-$1,600.
How we do it
We verify the NFRC label against the Climate Zone 1 requirements, install with complete frame replacement to eliminate air infiltration at the rough opening, then provide the product certification documentation for tax credit filing.
What Energy-Efficient Windows Costs in Wellington
| Item | Typical range in Wellington |
|---|---|
| Low-E/argon upgrade, vinyl frame | $80 - $150 per opening |
| Low-E/argon upgrade, thermally broken aluminum | $120 - $200 per opening |
| ENERGY STAR vinyl replacement window | $750 - $1,150 |
Will energy-efficient windows really lower my FPL bill in Wellington?
Yes. We typically see cooling-load reduction of 15-25% when replacing original aluminum single-pane stock with Low-E argon vinyl or thermally broken aluminum in Wellington’s climate; the savings are documented in the product performance specs we attach to your written quote. Call (863) 509-1135 for a load calculation on your specific home.
What’s the payback period on energy-efficient windows in Wellington?
At current FPL residential rates, most Wellington homeowners recover the premium over standard replacement in 7-10 years through reduced cooling load; the 365-Day Done Right Promise ensures the performance matches the specification. Call (863) 509-1135 and we’ll run the numbers against your last twelve months of usage.
Impact Garage Doors in Wellington

Wellington’s garage doors face the same wind-load requirements as the rest of the envelope, and many original tract-home doors from the 1980s and 1990s carry no Florida Product Approval at all. We install Impact Garage Doors rated for Palm Beach County’s design wind speed, with wind-load stickers visible and permits closed before we leave the site.
Hurricane-Rated Garage Doors
Signs you need it
Your garage door lacks a visible Florida Product Approval sticker, the panels flex visibly in moderate winds, or your windstorm insurer has listed the garage door as non-compliant.
What it costs in Wellington
Impact-rated steel garage doors with reinforced tracks and heavy-duty hardware range $1,800-$3,200 for a standard two-car opening; custom wood-look impact doors run $2,800-$4,500.
How we do it
We measure the opening for track gauge and spring torque requirements, install the wind-load-rated door with reinforced struts and upgraded track brackets, then tension the torsion springs to manufacturer specification and document the installation with photos.
Wind-Load Code Compliance
Signs you need it
You’re selling the home and the buyer’s inspector flagged the garage door, or you’ve received a notice of non-compliance from your insurance underwriter.
What it costs in Wellington
Retrofit of existing garage doors with wind-load reinforcement kits starts at $650-$1,100; full replacement with code-compliant impact-rated doors runs $1,800-$3,200 for standard sizes.
How we do it
We evaluate the existing door structure for reinforcement feasibility, specify either a retrofit kit with horizontal and vertical struts or a full replacement unit, pull the permit, and schedule Palm Beach County inspection for sign-off.
What Impact Garage Doors Costs in Wellington
| Item | Typical range in Wellington |
|---|---|
| Impact-rated steel garage door, two-car | $1,800 - $3,200 |
| Custom impact garage door, wood-look finish | $2,800 - $4,500 |
| Wind-load reinforcement kit, existing door | $650 - $1,100 |
Do I need to replace my garage door or can it be reinforced?
Many 1990s-era steel panel doors can be brought to code with engineered reinforcement kits if the track and spring system is in good condition; we evaluate the existing structure during our measured survey and specify the least-cost compliant path. Call (863) 509-1135 for that evaluation - estimates are free.
Will an impact garage door lower my insurance premium in Wellington?
Yes. Palm Beach County homeowners with full envelope impact protection, including the garage door, typically qualify for the maximum windstorm mitigation credits; we provide the Florida Product Approval documentation and installation certificate for your underwriter. Call (863) 509-1135 to verify your current mitigation status.
Custom & Geometric Windows in Wellington

Wellington’s equestrian estate homes near the show grounds and newer custom construction demand window shapes and sizes outside any standard catalog. We measure and specify Custom & Geometric Windows from ViewLux and ECO Window Systems, with every angle and radius documented on the survey the customer keeps.
Geometric & Shaped Windows
Signs you need it
You have trapezoids, triangles, or circular windows that are leaking, fogged between panes, or were originally installed without impact rating.
What it costs in Wellington
Custom geometric vinyl windows start around $1,400-$2,200 per opening; impact-rated aluminum geometric units with laminated glass run $2,200-$3,800 depending on complexity and size.
How we do it
We template the opening on-site with digital angle measurement, send the drawing to the manufacturer for shop approval, then install with custom flashing kits fabricated to match the specific geometry.
Oversized Openings
Signs you need it
You want to combine multiple standard openings into one structural opening for a panoramic view, or your custom home design specifies fixed glass panels exceeding 60 square feet.
What it costs in Wellington
Oversized fixed glass with impact-rated laminated panels runs $85-$140 per square foot installed; operable oversized units with custom hardware start at $120-$180 per square foot.
How we do it
We consult with a structural engineer for header and lateral load requirements, specify the glass thickness and lamination interlayer for the span, then install with marine-grade silicone bedding and custom aluminum pressure plates.
What Custom & Geometric Windows Costs in Wellington
| Item | Typical range in Wellington |
|---|---|
| Custom geometric vinyl window | $1,400 - $2,200 |
| Impact-rated aluminum geometric unit | $2,200 - $3,800 |
| Oversized fixed glass, impact-rated | $85 - $140 per sq ft |
How long do custom windows take to manufacture for Wellington?
Standard geometric shapes from ViewLux and ECO Window Systems ship in 6-8 weeks; fully custom oversized units with engineering review extend to 10-12 weeks. We schedule installation before the product leaves the factory so there’s no storage gap. Call (863) 509-1135 to timeline your project.
Can you match custom windows to my existing stucco color in Wellington?
We specify frame finishes from the manufacturer’s standard and custom color programs, and we document the selected swatch on your written quote; for exact stucco matching we coordinate with our finish contractor and photograph the result for your record. Call (863) 509-1135 to review color options.
Brands We Service in Wellington
We install and service PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux products in Wellington, stocking common hardware and weatherstripping for faster turnaround on service calls. Dispatch and scheduling are coordinated from our Miami office; crews serve Wellington locally with fully stocked vans. See our brands for performance tier and warranty details by manufacturer.
Pricing for Windows & Doors in Wellington, FL

| Service | Typical range in Wellington |
|---|---|
| Standard vinyl single-hung window | $650 - $950 |
| Impact-rated aluminum double-hung | $1,100 - $1,600 |
| Horizontal roller window, impact-rated | $1,200 - $1,750 |
| Solid-panel impact entry door | $2,200 - $3,200 |
| Impact entry door with sidelites | $2,800 - $4,500 |
| Impact-rated aluminum French doors | $3,500 - $5,200 |
| Low-E/argon upgrade, vinyl | $80 - $150 per opening |
| ENERGY STAR vinyl replacement window | $750 - $1,150 |
| Impact-rated steel garage door, two-car | $1,800 - $3,200 |
| Wind-load reinforcement kit | $650 - $1,100 |
| Custom geometric vinyl window | $1,400 - $2,200 |
| Oversized fixed glass, impact-rated | $85 - $140 per sq ft |
Price drivers in Wellington include slab foundation correction for racked openings, stucco repair integration, and permit fees for Palm Beach County wind-load verification. The written quote you receive before any work starts is the final invoice - Haven Clause 1, no change orders.
Neighborhoods We Serve in Wellington
We work across Wellington’s full footprint, from the original planned-community subdivisions to the equestrian estate parcels. Crews typically arrive within scheduled windows coordinated from our South Florida dispatch office.
- Greenview Shores
- VillageWalk
- Olympia
- Wellington Downs
- Saddle Trail Park
Service Area - Cities Near Wellington

Our crews serve the western Palm Beach County corridor including Royal Palm Beach, FL, Greenacres, FL, West Palm Beach, FL, and Palm Beach Gardens, FL. Each city carries its own permit jurisdiction and product approval requirements; we verify compliance before quoting.
Serving Wellington, FL - Our Local Coverage Area
We’re based in the Wellington area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Windows & Doors in Wellington

Most Wellington master-planned communities with active HOAs, including VillageWalk and Olympia, require architectural review for any visible exterior change; we provide the product cut sheets, color samples, and Florida Product Approval numbers as part of your submission packet. Submit the HOA packet before we pull the building permit to avoid timeline conflicts.
Because Wellington sits outside the High Velocity Hurricane Zone, contractors can specify from a broader approved-product catalog than Miami-Dade or Broward installers while homeowners still capture identical windstorm insurance credits - this product flexibility often yields better performance per dollar than coastal markets.
A live person answers our line 24/7, not a voicemail queue or callback window; scheduling and dispatch for Wellington are coordinated from our Miami office, with local crews arriving in uniform and identified by license number per Haven Clause 3. Call (863) 509-1135 to speak with someone now.
Call (863) 509-1135 to schedule your free measured survey and written estimate. Every opening we assess leaves you with a documented photo record, a price that cannot change, and the 365-Day Done Right Promise stamped on the job.
Six Reasons Homeowners Choose Sightline Windows & Doors Clewiston
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Sightline Windows & Doors Clewiston Services

What Neighbors Say About Sightline Windows & Doors Clewiston
What happens when you call
- 1A real person answersNo phone trees - talk to a local windows & doors pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Wellington Customers Say
"Patio door had dropped and would not lock. They adjusted it rather than selling me a new one, and charged accordingly."
- Simone T."Good crew, tidy install, finished a day early. Paperwork had the license number on it."
- Barry L."The survey measurements and the quote were the same piece of paper. Nothing changed on install day, which is not what happened with the two other companies we had out."
- Annette R.